Spectra-precision Survey Pro v4.5 Recon and Nomad Reference Manual Manuale Utente Pagina 383

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 469
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 382
Curve Menu
R-375
Compute Radius Point
Curve Radius Point.
The Compute Radius Point screen is used to compute and optionally
store the radius point for a curve when certain parts of the curve are
known.
PC Point: is the point that defines the beginning of the
curve (Point of Curvature).
PT Point: is the point that defines the end of the curve
(Point of Tangency).
Turn: specifies if the curve turns to the Left or Right as
you face the curve from the PC.
Arc: specifies if the arc is Small (less than 180°) or Large
(greater than 180°).
The final part of the curve is defined by one of the
following choices:
Radius : is the distance from the radius point to
the curve.
Delta : is the deflection angle.
Degree Arc : is the deflection angle that results in a 100-ft.
arc length.
Degree Chord : is the deflection angle that results in a 100-ft.
chord length.
; Store RP: When checked, the computed radius point will be stored
with the name specified here.
Solve : computes the location of the radius point.
Layout… : accesses the Curve Layout screen (Page R-377).
Traverse… : accesses the Traverse On Curve screen (Page R-382).
Vedere la pagina 382
1 2 ... 378 379 380 381 382 383 384 385 386 387 388 ... 468 469

Commenti su questo manuale

Nessun commento