Spectra-precision Survey Pro v4.5 Recon and Nomad Reference Manual Manuale Utente Pagina 300
- Pagina / 469
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Survey Pro Reference Manual
R-292
• Automatic Slope : selects the slope that is nearest to the
current rod position.
• Force CUT Slope : forces all computations to be based on a
cut slope.
• Force FILL Slope : forces all computations to be based on a
fill slope.
Topo SS… : will store the last shot taken as a side shot.
HR: is the rod height.
: opens the Smart Target options (Page R-444).
< Back : returns to the previous screen.
Store > : opens the next screen.
Slope Staking – Screen Five
The fifth screen is used to store a point for the last shot taken from
the previous screen, which should be located at the catch point.
Point Name: is the name assigned to the stored point.
Description: is the description assigned to the stored
point.
Results : This will display the following additional cut,
fill, and location information:
• Type of slope (e.g. left/right, cut/fill)
• Design and observed slope ratios (run
over rise)
• Design and actual stations
• HD and Cut/Fill to Hinge Point
• HD and Cut/Fill to Center Line
• If applicable, HD and Cut/Fill to Edge of Pavement
and Edge of Curb
• Name of segment and HD and Cut/Fill to that
segment extremity (Road Slope Stake only)
- SURVEY PRO 1
- Table of Contents 3
- Welcome 9
- Main Menu 11
- Surveying Mode 12
- Map View 12
- Quick Pick 12
- Battery Level 12
- Other Command Bar Buttons 13
- File Menu 15
- Open / New 16
- New Job 17
- External Control File) 18
- Create a New Job 3 19
- Control File) 20
- Save As 23
- Import *.JOB Coordinates 25
- Import *.CR5 Coordinates 26
- Import *.GPS Coordinates 26
- Import *.TXT Coordinates 26
- Import LandXML Coordinates 28
- Confirm Point Replace 29
- Export – Screen Two 31
- Export *.JOB Coordinates 31
- Export Old *.JOB Coordinates 31
- Export *.CR5 Coordinates 32
- Export *.TXT Coordinates 32
- Export *.CSV Coordinates 33
- Export LandXML (.XML) File 33
- Import Control Points 34
- Backup / Restore Job 34
- Backup / Restore – Backup 37
- Backup/Restore – Restore 38
- Transfer 39
- Register Modules 40
- About Survey Pro 41
- Job Menu 43
- NOTICE: 47
- Level Method 48
- Units Settings 49
- Format Settings 50
- Files Settings 51
- Surveying Settings 52
- Stakeout Settings 53
- and Road Stakeout 54
- Level Settings 56
- FGCS Defaults 58
- Repetition Settings 59
- Date/Time Settings 60
- Buttons Settings 61
- Edit Points 64
- Edit Point – General 66
- Point Feature Attributes 67
- Edit Point – Location 67
- Edit Point – Geodetic 68
- Edit GPS Point Flags Screen 68
- Edit Polylines 69
- Screen Four – Add/Edit Curve 71
- Adding a Vertical Curve 72
- Edit Alignment 74
- Edit Segment – Spiral Card 79
- Auto Linework 81
- View Raw Data File 85
- View DTM 86
- Layers for Staking DTM 87
- Choose Polyline 88
- Add/Edit Break-lines 88
- Edit Polyline 89
- Points on DTM Layer 90
- 3D View 91
- 3D View Settings 92
- Manage Layers 93
- Job Information 94
- Calculator 95
- Job Menu – GPS 97
- Receiver Setup 99
- Rx Settings 101
- Data Modem Settings 102
- Modem Serial Comms Screen 104
- Radio Settings Screen 104
- Cell Phone Settings Screen 106
- General Settings 107
- Measure Mode Settings 110
- Post Process Settings 112
- Job Menu – Basic GPS 113
- Settings 114
- Change Settings 115
- Bluetooth Setup Wizard 116
- Radio Settings 117
- Change Radio Settings Screen 118
- Date/Time 120
- Buttons 120
- General 120
- Survey Menu 121
- Backsight Setup 122
- Backsight Solved 123
- Check Backsight 125
- Check by Distance Results 126
- Check by Angle Results 126
- Backsight Circle 127
- Traverse / Sideshot 128
- Results 129
- Traverse Now or Later? 130
- New Occupy Point 130
- Point Exists 131
- Remote Shot (Remote Mode) 132
- Repetition Shots 133
- Multiple Sideshots 135
- Radial Sideshots 136
- _ft back 137
- 3_ft right 137
- Horizontal Angle Offset 138
- Vertical Angle Offset 139
- Auto Collect 140
- Auto Collect – Screen Two 141
- Corner & 2 Lines 142
- Corner & Angle 143
- Corner & Offset 144
- Corner & Plane 145
- Surface Scan 146
- Angle Grid 147
- Surface Scan Statistics 148
- Surface Scan Results 148
- Video Scan 149
- Video Scan Settings 152
- Shoot From Two Ends 153
- Record Mode 154
- Resection 155
- Resection – Screen Two 156
- Save Point 156
- Remote Elevation 158
- Check Point 159
- Solar Observation 160
- The Enter Shot Data Screen 163
- Sun Shot Procedure Summary 163
- Remote Control 165
- Turn To 166
- Results Card 167
- Video Card 168
- Video Display Options 169
- Video Settings 170
- Map Card 171
- Aim Card 171
- Foresight Card 172
- Sky Plot 172
- GeoLock Settings 173
- Survey Menu – GPS 175
- GPS Status 176
- Cell Modem 178
- Post Process 178
- Sky View 179
- Sat Info 180
- Position 181
- Start GPS Survey 182
- Choose Projection Mode 183
- Choose Base Setup 184
- Select Geoid Model 185
- Connect To Receiver 185
- Base Setup 187
- Receiver Antenna 189
- Vertical Offset 190
- Base Setup Two – SET 191
- Base Setup Two – GET and SET 191
- Rover Setup 193
- Solve Localization 194
- Data Collection 195
- Feature Collection Screen 196
- Offset Shots 197
- Occupy Data Points Screen 199
- Control Points 200
- Check Control Point Screen 201
- Occupy Control Point Screen 202
- Post Processing 203
- Projection 209
- Projection Details 211
- Localization Set Zone 211
- Select Coordinate System 212
- Horizontal Card 216
- Vertical Card 216
- Localization Calculator 217
- Solve Localization – Results 218
- Select Database 223
- Key in Zone 224
- Key In Zone - Ellipse 226
- Key In Zone - Results 228
- Ground Coordinates 229
- Ground Coordinates - Scale 230
- the mapping 231
- Import GPS Control 233
- Review Results and Finish 235
- Single Point Results 236
- Multiple Point Results 237
- Receiver Information 238
- Adjust with Projection 239
- Coordinate System 241
- Projection Calculator 244
- File Management 247
- Recoverable Files 248
- Survey Menu – Basic 249
- Start Survey – More than One 252
- Matching Base Point 252
- GPS Backsight/Resection 253
- Occupy Control Setup 254
- Occupy Control Point 254
- Resection for New Base Point 254
- Traverse Base 258
- Leveling Menu 263
- Select/Create Loop 264
- New Level Loop – Screen Two 265
- Level Notes 265
- Level Notes Settings 266
- Leveling Shots 268
- Leveling Shot Results 268
- Leveling Side Shot 269
- Leveling Stakeout 270
- Turn to Benchmark 270
- 2 Peg Test 272
- 2 Peg Shots 273
- Peg Test Results 273
- Adjustment 274
- Adjustment – Preview Screen 275
- Leveling Remote Control 276
- Stakeout Menu 277
- Stake Points 278
- Stake Points – Screen Three 280
- Instrument Stakeout 281
- Remote Staking 282
- Stake List of Points Screen 283
- Edit Point List 284
- Stake to Line 285
- Stake to Line – Screen Two 286
- Remote Stake to Line 287
- Offset Staking 289
- Offset Staking – Screen Four 292
- Offset Staking – Screen Five 293
- screen 294
- Offset Staking – Screen Six 294
- Slope Staking 296
- Slope Staking – Screen Three 297
- Slope Staking – Screen Four 298
- Slope Staking – Screen Five 300
- Slope Staking Offset Stake 301
- Point Slope Staking 303
- Stake Line and Offset 307
- value increases 308
- screen, described 308
- screen, which is 309
- Screen Summary 309
- location, the 309
- Stake Curve and Offset 310
- Stake Spiral and Offset 314
- Summary 317
- Show Station 318
- Show Station – Screen Two 319
- Store Offset Points 320
- Stake DTM 323
- Choose a Centerline 325
- Stake DTM – Screen Two 326
- Station Staking 328
- Cross-Section View 329
- Define a Location 332
- Where is Next Point 334
- Stakeout Menu – GPS 337
- Line and Offset 345
- Curve and Offset 346
- Spiral and Offset 346
- Show Station and Offset 346
- Inverse Menu 351
- Inverse Point to Point 352
- Inverse Point to Line 353
- Inverse Point to Polyline 354
- Inverse Point to Multiple 356
- Inverse Point to Location / 357
- Cogo Menu 359
- Point in Direction 360
- Intersection 361
- Offset Line 363
- Offset Points 364
- Station Offset 365
- Corner Angle 366
- Compute Area 367
- Triangle Solutions 368
- Map Check 369
- Add / Edit Line 370
- Add / Edit Curve 370
- Add to Map 371
- Predetermined Area 372
- HD/VD to SD/ZA 374
- SD/ZA to HD/VD 375
- AU Conversion 376
- Curve Menu 377
- Curve Solution 378
- Results: 379
- Known PI and Tangents 380
- Three Point Curve 381
- Compute Radius Point 383
- Line Tangent to Circles 385
- Curve Layout 386
- Tan Dist 387
- Chord Dist 388
- Traverse on Curve 390
- Parabolic Curve 392
- Parabolic Layout 394
- Straight Grade 396
- Spiral Layout 398
- Traverse on Spiral 399
- Roads Menu 401
- Add/Edit Templates 402
- Edit Template 403
- Edit Segment 404
- Edit Alignments 405
- Add/Edit Roads 405
- Roadname 406
- The Road Card 407
- Roads Report Screen 407
- Road Profiles Screen 409
- The Templates Card 410
- Add / Edit Template Screen 411
- The Widenings Card 412
- Add / Edit Widening Screen 413
- Super Elevations Card 414
- Road Stakeout 417
- Stake Road – Screen Three 419
- Stake Road – Screen Four 420
- ) dialog box 421
- Stake Road – Screen Five 422
- Road Slope Staking 423
- H. Map Card 424
- V. Map Card 424
- Slopes Card 425
- Cut/Fill Hinge Points Cards 425
- Road Station and Offset 426
- Alignment Card 427
- Cross-Section Card 428
- Shot Data Card 428
- Station Equation 429
- Adjust Menu 431
- Translate 433
- Traverse Adjust 435
- Traverse Adjust – Results 439
- Miscellaneous Screens 441
- Past Results 442
- Create Points 443
- Trimble Slant HR -> HR 444
- Convert Slant HI to HI 444
- Quick Pick Editor 445
- Point List Editor 446
- Map Display Options 449
- Manage Basemaps 450
- Edit Basemaps 451
- Smart Targets 452
- Manage Smart Targets 453
- Edit Smart Target 454
- Appendix A 457
- Lambert Zones 458
- ..........R-355, R-356 465
- ..................R-356 465
- ...........136, R-189 465
- .R-302 467
- ....R-299 467
- ........ R-310 468
- 12, R-340 468
- ...... 169, R-379 468
Prodotti e manuali riguardandi Software Spectra-precision Survey Pro v4.5 Recon and Nomad Reference Manual
(20 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 0.154 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale